Goals and vision
All parts and components of greenhouse structures are covered with hot-dip galvanized coating with SendzimirZ-275 standard to protect against oxidation. All fasteners and connections are based on European standards and all bolts and nuts used in the structures of this company are DIN931 standard and grade 8.8 with a tensile capacity of 80 kg. All metal parts of the structure have a two-year warranty against defects. The structures are resistant to wind pressure of 54 kilo-forces per square meter (28 meters per second). The calculation of the resistance of the structure against the wind speed is based on the client's data and meteorological information of the region, in accordance with the calculation rules of the European standards NF EN 1-13031. The columns are made in two can profiles with dimensions of 80x80 mm and 100x100 mm and thickness of 2 mm, which are made of hot galvanized material. Columns are installed with a distance of 2.5 meters in the walls and 5 meters in the interior. Each column is protected by a plastic cap at its end against water and moisture penetration, the endurance of the columns allows the forces on the greenhouse to be divided between the main parts of the greenhouse (column, bow, brace). The headstones are made in a special octagonal shape, which helps in the slope of the greenhouse roof, especially in places where the ground slope is high.
Goals and vision
The sheet used to make studs is made of galvanized steel with a thickness of 2 mm, and the pillars are fixed in place after installation by 3 set screws as shown in the picture below. The gutters are made of galvanized sheet (AZ-275 (275 gr/m2, 2 mm thick and 50 cm wide), which during 11 bending stages, in addition to having an exceptional form for collecting rainwater (40 liters per hour per square meter), They also give considerable strength to the structure. The slope of the rafters on the structure will be 0.4%. The bows are 60 tubes with 1.5 mm thickness AZ_275 (275gr.m2) Sendzimir galvanized) installed at a distance of 2.5 meters to each The bow, supports and braces (32 tubes with a thickness of 1.5 mm) are installed, which together make the structure stronger.
Goals and vision
Two reinforcing wind braces (cans 40 x 40 with a thickness of 2 mm) are located in the front and back of the greenhouse (in each opening), three columns (cans 80 x 40 with a thickness of 2 mm) are located vertically in the front and back of the greenhouse. . (in each opening) four braces (tube 32 with a thickness of 1.5) between the first and second arches in the front and back of the greenhouse (in each opening) the gearbox motor as well as the rack and pinion used in these windows depending on the length and weight of the window Selected dove wing valves open from the top of the sky so that hot air can be discharged better and faster. Their opening size is 130 cm. A rack and pinion is installed every 2.5 meters. Each opening has a 3-phase motor and 32 tubes as opening and closing shafts. Each of the hatches can have an anti-insect net.
